Xiaomi Robot Vacuum S10+ (BHR6368EU)

 

 

4000Pa Powerful suction fan blower

Vacuum dust and debris in one go

 

Stronger fan blower suction power allows you to clean your home more efficiently. With the 4000Pa fan blower suction power, your daily cleaning needs can be met easily. The 4 suction power settings allow you to clear away dust, hair and large particles in one go.

 

 

 

Up to 2 hours of battery life

Easily handle large homes

5200mAh nominal battery capacity. Last up 2 hours in Standard mode, offering you greater peace of mind. The robot is capable of cleaning over 200㎡ areas with one pass in Standard mode, more than enough to handle large rooms.

 

 

 

 

Pressure mopping at constant moisture

Effectively remove stains, 4 times the cleaning power

The dual mop pads rotate at high speeds to simulate the effect of manual pressure mopping, greatly improving the cleaning power and effectively removing wet, dry and other stains.

 

 

 

Double-layer composite mop pads

Strong water absorption and effective removal of stains

Mop pads made of woven fabrics (80% polyester + 20% modified polypropylene fibre) retain moisture evenly.

Powerful cleaning performance effectively removes floor stains when mopping and can effectively protect floor surfaces throughout the house.

 

Tech specs

Item Dimensions

350×350×97 mm

 

Rated Power

55 W

 

Charging Time

Approx. 6 hours

 

Net Weight Robot Vacuum

3.8 kg

 

Battery

4800 mAh (Rated Capacity)

5200 mAh (Nominal Capacity)

 

Rated Voltage

14.4 V

 

Drop sensor

Used to detect steps and drops

Robot will back up when the sensor detects a drop in height against typical media of approximately 85mm (white) or 15mm (black)

 

Ultrasonic sensor

Used to identify carpet material

 

LDS laser sensor

Used in image formation

Model in use is the D2M, the corresponding measurement distances are White: 0.15–8m and Black: 0.15–4m

 

Line laser sensor

Used to detect small obstacles

Laser can reach 50–400mm in a straight line

 

AI Visual identification sensor

Used to detect certain obstacles and furniture.

 

Extended edge sensor

Used along the wall

 

IMU Sensor

Robot vacuum motion status detection

Motion can be detected in the following areas: Acceleration ranges ±2g/±4g/±8g/±16g，Gyroscope

ranges from ±125°/s to ±200°/s

 

Drive wheel lift sensor

Used to detect if drive wheel is off the ground

Detects if wheels are lifted and triggers the drive wheel to stop if lifted in motion

 

Air pressure sensor

Test for dust collection capacity and blocked ducts